Open safety recalls, the components owners report failing most often, crash-test results and running costs for the 2018 Ram 3500 — assembled from NHTSA and EPA records.
Everything on this page applies to the model as a whole. Run its 17-character VIN to decode that exact car — its engine, trim, assembly plant and factory equipment — alongside these records. Free, no account.
Run a VIN →Recalls and complaints are filed against a specific model year, so figures differ from one year to the next even within a single generation. See every Ram 3500 year.
NHTSA lists 11 recalls for this make/model/year. Recalls apply to the model, so some may already be fixed on this specific car — check with a dealer using the VIN.
Issue: Streetcar ORV LLC (Streetcar) is recalling certain American Expedition Vehicles (AEV) 3" Dualsport aftermarket suspension kits, part numbers N0436000 and N0436001, sold for installation on 2013-2018 RAM 2500 and 3500HD trucks. Improper installation and machining of the original equipment steering knuckle may weaken the joint between the steering drag link and knuckle.
Risk: The weakened connection may result in a fractured steering drag link, causing a loss of steering and increasing the risk of a crash.
Remedy: Streetcar will notify owners and dealers will inspect and install a new steering knuckle, free of charge. The recall began December 3, 2018. Owners may contact AEV customer service at 1-248-926-0256, extension 500.
Campaign 18E096000
Issue: Chrysler (FCA US LLC) is recalling certain 2015-2017 Ram 1500, 2500 and 3500 pickup trucks equipped with an 8 foot bed and a power locking tailgate. Chrysler is also recalling all 2013-2014 and 2018 Ram 1500, 2500 and 3500 pickup trucks built before April 1, 2018 with a 6 or 8 foot bed and a power locking tailgate. On August 29, 2019 Chrysler expanded the recall to include an additional 693,128 model year 2013-2014 Ram 1500, 2500 and 3500 pickup trucks. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving.
Risk: If the tailgate opens while the vehicle is being driven, cargo may fall out the vehicle and create a road hazard, increasing the risk of crash.
Remedy: Chrysler will notify owners, and dealers will repair the tailgate latch, free of charge. The recall began May 23, 2019. Chrysler is expected to notify owners of the expanded population on October 18, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's number for this recall is V44. Note: 2015-2017 MY Ram 1500 pickup trucks with truck beds other than 8 foot, are currently covered under NHTSA recall 18V-486 for this issue.
Campaign 19V347000
Issue: Chrysler (FCA US LLC) is recalling certain 2018 Dodge Journey and RAM 1500, 2500, and 3500 vehicles. The backup camera may experience a loss of image display while backing up. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Risk: A loss of image in the rearview camera while backing up can increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will replace the rearview mirror, free of charge. The recall began August 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U56.
Campaign 18V398000
Issue: Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
Risk: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Campaign 18V332000
Issue: Chrysler (FCA US LLC) is recalling certain 2013-2018 Ram 3500 and 2014-2018 Ram 3500 Chassis Cab and Ram 2500 vehicles. The outboard steering linkage jam nut may loosen, allowing one end of the drag link to separate.
Risk: A drag link separation can cause a loss of steering control, increasing the risk of crash.
Remedy: Chrysler will notify owners, and dealers will check the steering linkage jam nut tightness, replacing the drag link assembly or welding the nut to the adjuster sleeve, free of charge. The recall began March 22, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V06.
Campaign 19V021000
Issue: Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.
Risk: Wheel separation can cause a vehicle crash.
Remedy: Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.
Campaign 21V398000
Issue: Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Risk: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Campaign 17V824000
Issue: Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Risk: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy: Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.
Campaign 18V100000
Issue: Chrysler (FCA US, LLC) is recalling certain 2017-2018 Ram 2500 Pickup, Ram 3500 Pickup, 3500 Cab Chassis, 4500 and 5500 Cab Chassis vehicles. The hydraulic control unit (HCU) may fail, which can cause the anti-lock brake (ABS), electronic stability control (ESC), and traction control systems to fail.
Risk: A loss of anti-lock brakes, electronic stability control, or traction control can increase the risk of a crash.
Remedy: Dealers will replace the brake HCU, or replace the HCU motor, free of charge. Interim notification letters, notifying owners of the safety risk, were mailed January 9, 2025. Some owner notification letters were mailed January 9, 2025. The remaining owner notification letters will be mailed at a future date, anticipated July 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is C4B.
Campaign 24V896000
Issue: Chrysler (FCA US, LLC) is recalling certain 2016-2019 Ram 3500, Ram 1500, 2016-2020 Ram 2500, and 2016 Ram 3500 Cab Chassis vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.
Risk: An inflator rupture may result in sharp metal fragments striking occupants, resulting in injury.
Remedy: Dealers will replace one or both side curtain air bags, as necessary, free of charge. Owner notification letters were mailed February 13, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's numbers for this recall are 05C, 09C, and 10C.
Campaign 25V010000
Issue: Chrysler (FCA US, LLC) is recalling certain 2018 Ram 1500, Ram 2500, and Ram 3500 vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.
Risk: An inflator rupture may result in sharp metal fragments striking occupants, resulting in injury.
Remedy: Dealers will replace one or both side curtain air bags, as necessary, free of charge. Owner notification letters were mailed September 25, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's numbers for this recall are 83C, 91C, and 92C. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 18, 2025.
Campaign 25V592000
NHTSA has no NCAP crash-test rating for this model/year (common for older, low-volume, or heavy-duty vehicles).
No EPA fuel-economy match for this model (naming may differ or it predates EPA records).
The parts named most often across 780 owner complaintsfiled with NHTSA for this make, model and year — the closest free answer to “what is likely to go wrong?”
3 crashes
4 crashes
1 crash · 2 injured
Complaints are self-reported and skew toward problems people find alarming, so treat this as where to look, not a defect rate.
1 complaint-reported fatality on this model.
My 2018 Ram 3500 had safety recall V06 (19V-021) performed, which involved welding the drag link. This recall remedy has caused a secondary safety defect: my vehicle is now severely out of alignment, causing rapid, uneven tire wear on the outside edges and compromising steering handling. I contacted FCA Customer Care (Case #97534845). They acknowledged TSB 19-001-19 exists for aligning welded trucks, yet my dealer refuses/is unable to align it. FCA representative 'May' then instructed me to 'pay out of pocket' to replace the steering components. FCA is refusing to honor the replacement clause outlined in their own STAR case 9100268. The manufacturer's recall remedy has ruined my steering geometry, and FCA is refusing to fix the safety hazard they created
The contact owns a 2018 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic). The contact stated that while driving on several occasions at various speeds and depressing the brake pedal, the brake pedal became firm. The contact stated that the traction control and ABS warning lights were illuminated. The contact continued driving the vehicle, and the brake pedal operated normally. The vehicle was taken to a dealer, where it was diagnosed and determined that the hydraulic control unit needed to be replaced; however, parts were not available for the recall repair. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the failure. The failure mileage was approximately 40,000.
The contact owns a 2018 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The dealer was contacted; however, the contact was informed that parts were not yet available. Additionally, the contact stated that the recall was initiated several years ago, and parts were still not yet available. The manufacturer was not contacted. The contact had not experienced a failure.
The contact owns a 2018 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the vehicle failed to respond while depressing the brake pedal in a panic stop, requiring the contact to depress the brake pedal a second time. The traction control and the ABS warning lights were illuminated. The vehicle was taken to the dealer, where it was diagnosed, and the contact was informed that the part was unavailable to repair the vehicle. The manufacturer was notified of the failure and advised the contact to pay for the repair and reimbursement would be provided; however, the dealer confirmed that the part was unavailable. The failure mileage was approximately 90,000.
The contact owns a 2018 Ram 3500. The contact stated that while waiting at a traffic light to enter the freeway, the contact started to accelerate, and the vehicle started shaking abnormally. The ESC warning light was illuminated. The contact associated the failure with NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic). The dealer was contacted, and the contact was informed that parts for recall repair were not yet available. The manufacturer was not made aware of the failure. The failure mileage was approximately 189,000.
The contact owns a 2018 RAM 3500. The contact stated while attempting to start the vehicle, the contact noticed an abnormal cracking sound and smoke coming from the engine compartment. The contact inspected and used a fire extinguisher to slow the smoke and electrical sparks down. The contact did not notice any fire. The fire department arrived and disconnected the electrical cables to prevent further damage. The contact stated that the vehicle was inoperable. In addition, the contact stated that the failure occurred while the contact was traveling on vacation. The vehicle was towed to the dealer. The contact was informed that the failure was not diagnosed. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The vehicle was later towed to an RV service center. The manufacturer was not made aware of the failure. The failure mileage was approximately 23,000.
Before the recall, I was driving my vehicle and the brakes and the power steering locked up. The vehicle felt like it was trying to drive with the emergency brake on. After this happened, I took the vehicle to Haley Jeep Jam, Richmond, VA, and they said they couldn't determine anything was wrong, but replaced the brake pads. Shortly after this visit to the service department, the recall appeared. Since the recall, we have contacted Haley Jeep Ram and Whitten Brothers multiple times, but they are unable to fix the recall due to no resolution from Daimler Chrysler. In August 2025, Whitten Brothers, Ashland, VA, replaced the part with a new, recalled part as a temporary fix. There is still no permanent fix for this recall which continues to be a safety risk. Since the vehicle has an outstanding safety recall, we are unable to sell or trade in this vehicle. We have been patiently waiting but believe this should no longer be our problem. Daimler Chrysler needs to do the right thing to assist the vehicle owners. We have mailed a corresponding letter to NHTSA. Thank you for your time.
The contact owns a 2018 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted and confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the ABS warning light was illuminated while driving and the ABS and cruise control features were inoperable. The failure mileage was 80,000.
The contact owns a 2018 Ram 3500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The dealer was contacted, and the contact was informed that the parts were unavailable. The contact was informed that the parts were on back order. The manufacturer was not contacted. The contact had not experienced a failure.
ABS/TRACTION CONTROL light and warning alarm goes off continuously. Very dangerous when towing a 15k pound camper.
The contact owns a 2018 Ram 3500. The contact received notification of NTHSA Campaign Number: 24V896000 (Service breaks, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
This recall came out 1.5 years ago and there still is no remedy. At a car wash my truck wouldn’t stop and I slid into a concrete pole and damaged the fender and headlight. The corporate office told me, when I called, that currently there is nothing that they can do.
Showing 12 of 780 complaints.