Open safety recalls, the components owners report failing most often, crash-test results and running costs for the 2011 BMW 328I — assembled from NHTSA and EPA records.
Everything on this page applies to the model as a whole. Run its 17-character VIN to decode that exact car — its engine, trim, assembly plant and factory equipment — alongside these records. Free, no account.
Run a VIN →Recalls and complaints are filed against a specific model year, so figures differ from one year to the next even within a single generation. See every BMW 328I year.
NHTSA lists 7 recalls for this make/model/year. Recalls apply to the model, so some may already be fixed on this specific car — check with a dealer using the VIN.
Issue: BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Campaign 20V017000
Issue: BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and electrical connectors for the system that controls air flow for the heating and air conditioning system may overheat.
Risk: Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Remedy: BMW will notify owners, and dealers will replace the wiring and electrical connectors, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact BMW customer service at 1-800-525-7417.
Campaign 17V676000
Issue: BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Risk: An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy: BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
Campaign 17V683000
Issue: BMW of North America, LLC (BMW) is recalling certain model year 2010-2011 128i Coupe, 128i Convertible, 328i Sedan, 328i xDrive Sedan, 328i Coupe, 328i Convertible, 328i Sports Wagon and Z4 sDrive 30i, 2011-2012 135i Coupe, 135i Convertible, 335i Sedan, X5 xDrive 35i, and X6 xDrive 35i, 2011 335i xDrive Sedan, 335i Coupe, 335i Convertible, 528i Sedan, 535i Sedan, 535i xDrive Sedan, X3 xDrive 28i, and X3 xDrive 35i, 2010 X3 xDrive 30i, and X5 xDrive 30i, 2012 640i Coupe, and 640i Convertible and 2010-2012 535i Gran Turismo vehicles. In the affected vehicles, the bolts that secure the housing for the variable camshaft timing adjustment (VANOS) unit can loosen over time and may possibly break.
Risk: If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.
Remedy: BMW will notify owners, and dealers will replace the four VANOS housing bolts for both VANOS units (intake and exhaust), free of charge. In addition, owners of approximately 170,172 model year 2010-2012 BMW vehicles equipped with inline 6 cylinder engines not covered by this recall, will receive an extended warranty to address this condition. The recall began on September 24, 2014. Owners may contact BMW at 1-800-525-7417.
Campaign 14V176000
Issue: BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through June 2011; and 2009-2011 Z4 vehicles manufactured March 2009 through June 2011. In February 2013, BMW recalled 504,545 vehicles. In July 2013, BMW informed the agency that it was adding 1-Series, 3-Series, and Z4 vehicles, representing an additional 12,094 vehicles. The total number of vehicles being recalled is now 516,791. The connector for the positive battery cable connector and the corresponding terminal on the fuse box may degrade over time. Over time, the high current flow and heat from electrical resistance may lead to a breakage of the connection, and a loss of electrical power to the vehicle.
Risk: If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.
Remedy: BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on March 13, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Campaign 13V044000
Issue: BMW IS RECALLING CERTAIN MODEL YEAR 2011 328I XDRIVE AND 335I XDRIVE VEHICLES MANUFACTURED FROM FEBRUARY 8, 2011, THROUGH JULY 29, 2011. THE FRONT DRIVESHAFT ATTACHMENT BOLTS MAY NOT HAVE BEEN TIGHTENED TO SPECIFICATION. IF THE BOLTS WERE NOT TIGHTENED TO SPECIFICATION, THEY MAY BECOME LOOSE.
Risk: IF THE BOLTS LOOSEN, IT COULD LEAD TO A LOSS OF POWER TO THE FRONT WHEELS AND ULTIMATELY A VEHICLE BREAKDOWN, INCREASING THE RISK OF A CRASH.
Remedy: BMW WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE FRONT DRIVESHAFT ATTACHMENT BOLTS FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING OCTOBER 2011. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AND SERVICES AT 1-800-525-7417.
Campaign 11V476000
Issue: BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that can explode during deployment.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy: Dealers will inspect and replace the driver's air bag module as necessary, free of charge. Owner notification letters were mailed August 30, 2024. Owners may contact BMW customer service at 1-800-525-7417.
Campaign 24V513000
24.1 mpg average · 22–26 range · EPA says 22
Over 5 years this costs $6,250 more in fuel than an average new vehicle.
1 open NHTSA investigation into this model. Investigations come before recalls, so these are potential defects not yet covered by one.
Rated configuration: 2011 BMW 328 I 2 DR AWD
The parts named most often across 679 owner complaintsfiled with NHTSA for this make, model and year — the closest free answer to “what is likely to go wrong?”
6 fires · 1 injured
1 crash · 6 fires
9 crashes · 9 injured
8 fires
3 fires
1 fire
1 crash · 1 injured
Complaints are self-reported and skew toward problems people find alarming, so treat this as where to look, not a defect rate.
I brought my vehicle to an authorized dealer for three open safety recalls. Two were performed at no charge. The third, the VANOS adjustment unit screw connection recall, was not performed. The dealer stated in writing on the repair order that the vehicle has a broken valve cover bolt, that the valve cover will not seal properly, and that a new valve cover is recommended to complete the recall. They quoted $1,077.43 for a valve cover as a customer-pay repair and stated the recall could not be completed until that was done. I declined the valve cover. The recall was not performed. The bolt is not broken and the valve cover is not broken. The threads in the cylinder head bolt boss are stripped, and a larger bolt was installed that holds. There is no oil leak. A new valve cover would thread into the same stripped hole in the cylinder head and would not repair the damaged threads. The dealer's proposed repair does not address the condition they described. The manufacturer's dealer bulletin for this recall lists a cylinder head cover profile seal as a recall part and does not list a valve cover in any parts list. The remedy requires removing the cylinder head cover regardless. I left without signing the repair order. The recall remains open. I am reporting that a free safety recall remedy was conditioned on a customer-pay repair. The dealer could have performed the recall, documented the pre-existing thread damage on the repair order, noted that the customer was advised and declined the valve cover, and disclaimed responsibility for any future seepage at the cover. I would have accepted that. Instead they performed neither the recall nor any repair, and left a federal safety recall open.
The contact owns a 2011 BMW 328I. The contact stated that upon starting the vehicle, the low oil pressure warning light illuminated, and the vehicle stalled. The vehicle was towed to an independent mechanic, where it was diagnosed, and determined that the VANOS bolts had failed and needed to be replaced. The vehicle was not repaired due to the cost. The contact related the failure to TSB Number: SIB 11 04 14. The manufacturer was notified of the failure and informed the contact that the vehicle was covered under the TSB. The failure mileage was approximately 157,637.
The contact owns a 2011 BMW 328I. The contact stated that on several occasions while driving on the streets and the highway, the vehicle lost automotive power. There were no warning lights illuminated at the time of the failure. The contact stated that the vehicle jerked unexpectedly, stalled, and failed to accelerate over 30 MPH. The vehicle was towed to an independent mechanic but was not diagnosed or repaired. The mechanic referred the contact to the dealer for further assistance and stated that the failure could be related to a recall. The vehicle was towed to the dealer, but was not diagnosed or repaired. The contact stated that the failure started after the vehicle was repaired under an air bag recall by the dealer, and the failure persisted. The manufacturer was made aware of the failure. The approximate failure mileage was 200,000.
The contact owns a 2011 BMW 328I. The contact stated that while driving at various speeds, there was a burning odor coming from the vehicle. The odor was more prominent while the vehicle was idling. The RPM fluctuated while idling, causing the vehicle to stall. The contact would depress the brake pedal, place the vehicle in neutral, turn off, and restart the vehicle to accelerate and continue driving. The air bag warning light was illuminated, and the message, "Check Engine Soon," was displayed. The vehicle was taken to a certified mechanic, and a diagnostic code was retrieved for Positive Crankcase Ventilation (PCV) failure; however, no repairs were completed. The contact completed some research and learned that the failure could be occurring due to air entering the brake lines. The contact also found information about NHTSA Campaign Number: 22V119000 (Engine); however, the VIN was not included. The vehicle was not taken to the dealer, diagnosed, or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 133,000.
Fuel Pump Control Module and Fuel Pump Failed at highway speeds. There was a notification warning for a failed fuel pump and then the engine shut down and stalled at highway speeds within seconds.
> While driving the car, low oil pressure indicator came on and within less than a mile later there was a sudden loss of power, engine stalled and then would not start again, requiring vehicle to be towed off the road and to a repair garage. Yes, vehicle is available for inspection upon request. >Vehicle was immobile on the road putting driver of vehicle and other vehicles on the road at risk of accident and injury. > Attached documentation reviews the issue. > Vehicle originally inspected by non-dealership garage that strongly recommended the vehicle be evaluated by BMW. Vehicle was towed to and inspected by BMW Sewickley [XXX] . BMW states not covered under Vanos recall. >Only immediately prior to stall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
> While driving the car, the low oil pressure indicator came on, and within less than a mile later there was a sudden loss of power, engine stalled and then would not start again, requiring the vehicle to be towed off the road and to a repair garage. > Vehicle was immobile on the road putting driver of this vehicle and other vehicles on the road at risk of an accident and injury. > Vehicle originally inspected by non-dealership garage that strongly recommended the vehicle be evaluated by BMW. Vehicle was towed to and has been inspected by BMW Sewickley [XXX] . > Only immediately prior to stall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Engine lost all oil pressure, smoke came through vents with the smell of burnt oil. Engine stalled, intake camshaft no longer moves when the engine is trying to turn over. Vanos system failed.
The power cable to my battery needed to be replaced from the front to the rear. This seems like the recall NHTSA CAMPAIGN ID: 13V044000 but my car was not listed for it.
The contact owns a 2011 BMW 328I. The contact stated that while driving approximately 65 MPH, the check engine warning light illuminated, and the vehicle hesitated and stalled. The vehicle was restarted several times but continually stalled. The vehicle was later towed to the residence. The contact examined the engine and discovered metal shavings in the VANOS solenoid engine oil. The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the failure. The vehicle was not yet repaired. The failure mileage was 120,000.
The contact owns a 2011 BMW 328I. The contact stated that while driving at an undisclosed speed, the contact noticed an abnormal dinging sound coming from underneath the hood. The vehicle was taken to the dealer where it was diagnosed with a detached VANOS bolt. The contact was informed that the failure was due to unrepaired recall NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling). The recall repair was performed. The vehicle was repaired. The contact stated that when the vehicle was released to the contact, the contact stated that the vehicle was shaking violently, and the RPM was fluctuating. In addition, the engine shut off while idling. The contact stated that the failure occurred before leaving the dealer. The dealer requested that the vehicle remain at the dealer for inspection. The vehicle was taken back to the dealer the following day. The vehicle was inspected, and the contact was informed that the failure was not related to the recall. The contact was requested to provide a diagnostic fee for further diagnostic tests and the contact declined. The contact stated that the vehicle was in worse condition after the recall repair was performed. The manufacturer was not made aware of the failure. The failure mileage was 91,000.
Footwell module (FRM) module went out after negative battery disconnect to change fuse. Module being inoperable is causing windows to not operate,interior lighting not working, headlights stay dim (not good for nightime driving), blinkers inoperable (not good for driving with windows not working- no arm signals), dash light also inoperable.
Showing 12 of 679 complaints.