Open safety recalls, the components owners report failing most often, crash-test results and running costs for the 2016 Jeep Wrangler, assembled from NHTSA and EPA records.
Everything on this page applies to the model as a whole. Run its VIN to decode that exact car, its engine, trim, assembly plant and factory equipment, alongside these records.
Open a VIN recordRecalls and complaints are filed against a specific model year, so figures differ from one year to the next even within a single generation. See every Jeep Wrangler year.
No EPA fuel-economy match for this model. Naming may differ, or it predates EPA records.
NHTSA has issued a do-not-drive warning covering 1 recall on this make, model and year. Repairs are free at any franchised dealer.
Recalls are issued per model. Confirm whether this specific car has already been repaired using its VIN, free, at any franchised dealer or on nhtsa.gov/recalls.
NHTSA lists 5 recalls for this make, model and year. Recalls apply to the model, so some may already be fixed on this specific car. A dealer can confirm from the VIN.
Issue: Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Risk: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
Campaign 19V018000
Issue: Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.
Risk: A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.
Remedy: FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.
Campaign 19V680000
Issue: Chrysler (FCA US LLC) is recalling certain model year 2016-2017 Jeep Wrangler vehicles manufactured June 16, 2015, to August 14, 2016. In certain crash conditions, the front impact sensor wiring may be pulled until it detaches before a signal can be received by the Occupant Restraint Controller (ORC).
Risk: If the ORC module does not receive a signal from the front impact sensor, both frontal air bags and the seat belt pretensioners will not deploy in the event of a crash, increasing the risk of injury.
Remedy: Chrysler will notify owners, and dealers will reroute the front impact sensor wiring and relocate the impact sensor branch, free of charge. The recall began on November 10, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S76.
Campaign 16V734000
Issue: Chrysler (FCA US LLC) is recalling certain model year 2011-2016 Right Hand Drive Jeep Wrangler vehicles manufactured February 16, 2010, to May 2, 2016. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.
Risk: Failure of the air bag circuit may prevent the driver's frontal air bag from deploying in the event of a crash, increasing the risk of injury.
Remedy: Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on August 11, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S40.
Campaign 16V288000
Issue: Chrysler (FCA US, LLC) (Stellantis) is recalling certain right hand drive 2016 Jeep Wrangler vehicles. Debris contamination may cause the clockspring to fail, preventing the driver's air bag from deploying in a crash.
Risk: An air bag that does not deploy in a crash can increase the risk of injury.
Remedy: Dealers will replace the clockspring, steering wheel back cover, and steering column shrouds, free of charge. Owner notification letters were mailed April 4, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 27B.
Campaign 24V196000
3 open NHTSA investigations into this model. Investigations come before recalls, so these are potential defects not yet covered by one.
Rated configuration: 2016 Jeep Wrangler 4DR 4WD
The parts named most often across 460 owner complaints filed with NHTSA for this make, model and year.
1 injured
17 crashes · 22 injured
1 crash · 1 fire
1 crash · 4 fires · 3 injured
2 injured
Complaints are self-reported and skew toward problems people find alarming, so read this as where to look rather than as a defect rate.
When I was coming to a stop at a stoplight, my vehicle started to violently wobble almost having me to loose control. I was unable to slow down when pressing the brakes and almost hit vehicles in front of me.this has happened numerous times and I have had my tires rotated and alignment done just recently.
ABS Control Module stopped working with several warning lights showing on dash display. After 12 months the dealer is unable to supply a replacment part or a possible date when a new part might be available.
The ABS module on my jeep has failed. I've been put on a list to get a replacement part but have been on the list for 10 months with no indication of when my parts order will be fulfilled. The failed ABS module caused the BRAKE, ABS and TCS warning lights to be on. I am driving a vehicle under unsafe conditions and the manufacturer does not care.
My 2016 Jeep Wrangler is experiencing an ongoing problem with the ABS/braking system and wheel-speed sensor. The ABS/brake warning light comes on intermittently, particularly when turning right and during hot weather. The vehicle has NOT been repaired for this problem. I am reporting it because I am concerned that there may be a defect involving the wheel-speed sensor, sensor wiring/connection, wheel hub, or ABS system. Because these components are connected to the vehicle’s anti-lock braking and stability/traction-control systems, I am concerned about the safety of continuing to drive the vehicle. I would like this problem investigated as a potential safety defect. I am also requesting that NHTSA review whether other 2016 Jeep Wrangler owners have reported similar ABS, brake warning light, or wheel-speed sensor failures and determine whether a safety recall is warranted. There was no accident it just started happening on its own.
ABS Brake Sensor is on and the ABS Module needs to be replaced, however there are a lot of other people out there with this same issue and nobody can keep up with the parts to fix the problem. This should be a recall for all Jeeps 2009-10018
The contact owns a 2016 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle experienced an ABS module failure. The ABS and traction control warning lights were illuminated. The dealer was contacted and diagnosed the vehicle with ABS control module failure; however, the part to repair the vehicle was not available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time to provide the parts for the repair. The manufacturer was made aware of the failure but was unable to determine when parts for the repair would be available. The failure mileage was approximately 80,000.
The ABS control module has internal problem which shuts down the module. Results of the module shut down includes: -The stability and traction systems are offline. -A failure in the ABS module or hydraulic unit. -Cruise Control inoperable. -The module no longer modulates brake pressure, which can result in brakes locking. Currently, Mopar has stopped production of this item, so there is no method to replace a failed or non-working module with an original part.
Code C2200 Multiple visits to shop. Part is on indefinite backorder. Brakes lock up when quick needed, traffic/other driver pull out in front of me Showed up 4 months ago
I was driving down the road in a snow storm when all of a sudden the vehicle started swirling all over the road. I pulled over and looked underneath and something was hanging down. I had no choice but to drive it slow less than 10mph to make it home as it was also making a hard jumping. Once there I had my mechanic come look at it and the drive shaft was busted. I am extremely luck that this happened during a snow storm because if not I may have rolled the vehicle as the steering was greatly affected.
ABS module is bad, shooting codes on dash, disable cruise, worried about issues with braking.
The ABS Module is non operative and has been on back order for over 3 years from the Dealership.
My 2016 Jeep Wrangler will buck and jerk when on the highway. I’ll be going a steady speed, not changing speed. I feel the car slow down and stomp on the gas but it goes all the way to the floor and nothing happens. When I try to go into the break down lane, the steering wheel locks up and won’t turn. Usually I take the key out then put it back in the ignition and it starts no problem. Recently, the engine has been stalling when I put the key back in the ignition. I usually have to take the key out and sit on the side of the highway for 5 minutes before starting it up with no problem. This has happened too many times than I’d like to admit. Take it to the shop, no codes come up. Sometimes the engine light will turn on when this happens, other times it doesn’t.
Showing 12 of 460 complaints.